Multicharger NiteCore Sysmax New I4 (Li-Ion, LiFePo, Ni-MH, Ni-CD)
A high quality charger - for your security!
Product characteristics
- Four charging slots - can be used independently
- Each charging slot charges and monitors individually and independently
- Active power distribution (ACD technology)
- Compatible with 1.2V, 3.7V, 4.2V and 4.35V batteries
- Optimized charging program for IMR batteries
- Automatic detection of non-rechargeable batteries
- Automatic charge current selection based on battery capacity
- Termination threshold for battery voltages and charging current can be set independently for each individual charging slot.
- Can charge four batteries simultaneously
- Three different charging methods (Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge)
- Automatic recognition of the battery charge status and display of the current charging process
- Automatic charging stop after completion of the charging process
- Reverse polarity protection and short circuit prevention
- Reactivation of deeply discharged batteries
- Microprocessor-controlled charging process that protects and monitors the batteries from overcharging
- Automatic time-dependent charge cut-off
- Temperature monitoring to prevent overheating damage
- Housing made of heat-resistant plastic (fire-retardant)
- LED display with status message
- Optimal heat dissipation
- Certified by RoHS, CE, FCC and CEC
The Multicharger NiteCore Intellicharger New I2 is a inteligent charger, charging Lithium-Ion, LiFePo, NiMH and NiCd batteries.
Thanks to the inteligent electronic, the charger detects the battery and adjusts the charging bahavior. It possesses
three charging methods (Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge).
Charges the following battery types:
Li-Ion, LiFePo4 IFR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650,
16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500,18650, 18700, 20700,
21700, 22500, 22650, 25500, 26500, 26650
Ni-MH/Ni-CD: AA, AAA, A, SC, C
Attention:
if you wand to charge two different battery types, please ensure that theres a proper contact between the battery
pins and the metal contacts of the charger.
The NiteCore Intellicharger I2 is only charging Li-Ion, LiFePo, Ni-MH and Ni-Cd batteries. Don't use it for other battery
types, because this could lead to an explosion of the battery, cracks in the protection and therefore to leakage
which could cause personal or material damage.
Only use the charger indoors. Protect it of water, high air humidity and of very low or high environment
temperatures.
Never disassamble or modify the charger.
Keep the charger away from children.
Don't use or store the charger next to open fire, direct sun, heater or other high temperature environments.
Surmount is not responsible for damage, caused by misuse of the Nitecore new i2 charger.
Technical details:input voltage: AC 100-240 V 50/60 Hz / 0.25mA (max) 10w, DC 9 - 12V
output voltage: 4.35V ± 1% / 4.2V ± 1% / 3.7V ± 1% / 1.48V ± 1%
output current: 1500mA x 1 / 750mA x 2 / 500mA x 3 / 375mA x 4
dimensions: 140 mm × 96 mm × 37 mm
weight: 206 g (without wire and batteries)
Including:1 x NiteCore Sysmax New I4
Batteries are not included in the delivery contents!
