Joyetech Cubis Max
Atomizer without coils? Innovation, made by Joyetech!

27,20 €

including 16% VAT. , plus shipping

Available now!

There are variations of this item. Please select the variation you wish.


Joyetech Cubis Max

The Cubis Max combines the cost advantage and taste experience of a rebuildable tank with the convenience of a normal atomizer. Its extremely low maintenance costs, however, are not just a pleasure for the penny pinchers!

The innovative Joyetech tank with its coil-less design belongs to a very own species. In contrast to conventional atomizers, the e-liquid is heated and vaporized on a heating plate instead of a coil.
Below the heating plate there is a cotton pad. For a quick cotton swap in between, this is simply removed and a fresh pad inserted. The procedure is uncomplicated and even for beginners no problem.

The heating plate, fixed with two small screws, is extremely durable and should only be replaced every six to ten weeks. Alternatively, you can simply clean it under running water, for example with an old toothbrush. This way the life of the plate can be extended by a few cycles before it has to be replaced.

The rest of the handling is also wonderfully user-friendly. For filling, for instance, the top cap is simply pushed to the side and e-liquid can be refilled. The tank volume is a proud 5 millilitres!
In addition, the Cubis Max, like all previous Cubis tanks, has a leak-proof cup design. Here the air supply is located at the top of the tank. Two large slots opposite each other forming the top airflow, which can be steplessly adjusted. Thereby everything is possible from a very open to a slightly tighter draw.

The Cubis Max promises the best performance with a moderate output of 35 to 45 watts.

- no coils
- low maintenance costs
- easy handling
- good taste
- leak-proof design
- 5 millilitre capacity
- good performace with moderate battery output

Technical Data:
- Material: stainless steel, glass
- Dimensions: 48 x 28 mm
- 5 ml capacity
- NCFilm heating plate Kanthal 0.28 ohm / 35 W - 45 W
- Inhalation method: DL (direct lung)
- Connector: 510

1 x Joyetech Cubis Max
2 x NCFilm heating plate
1 x cotton (pre-installed)
1 x replacement glass
1 x spare parts
1 x manual

Tip: If you want to save even more on the long run, take the Muji Wattepads and cut them to size yourself. Since they are a bit thicker than the Joyetech product, the cut should have about half a milliimeter of space on all sides in the cotton wool deepening. We recommend a cut with the dimensions 12 x 15 millimeters.

Shipping weight: 0,16 Kg


Average product review

Write your first review and help others with their purchase decision:

Recommended Hardware
Other customers have also bought the following items