Innokin Zenith Zlide Tube Kit + 3x free e-liquid
Elegant MTL Tube Kit with great endurance

38,89 €

including 16% VAT. , plus shipping

4 In stock

There are variations of this item. Please select the variation you wish.


Innokin Zlide Tube Kit + 3x free e-liquid

INNOKIN - a name, associated with pure MTL pleasure by connoisseurs . And with good reason, as the manufacturer proves again with the release of the Zlide Tube Kit! With a tank volume of 4 millilitres and a battery capacity of 3000 mAh, the beginner-friendly MTL kit is almost in a class of its own when it comes to endurance.

The Zlide atomizer is the direct successor to the Zenith and builds on its proven technology. So the popular Zenith coils are also used here. The Zlide features the innovative coil plug-in system and the finely adjustable airflow through 4 small holes in the base as well.

New is the filling mechanism via the eponymous sliding process: For refuelling, simply "slide" the Top Cap to the side and the filling opening is exposed. To prevent the device from opening accidentally, the tank must first be "unlocked" by pulling off the mouthpiece.
A further innovation and convenience is the now exchangeable glass tank.

The Zlide is driven by a 3000 mAh tube-shaped battery, which merges perfectly with the tank to form a harmonious unit.
The output is fortunately clocked: The battery fires atomizer heads below 1 ohm with a constant power of 16 watts. If the resistance of the installed coil is in turn 1 ohm or higher, the constant output is 13 watts.
What is amazing is the immediate power output when the fire button is pressed. Without prelude and almost without delay, the current is passed on to the atomizer and thus gets the coil going.

The battery charge level is displayed via an LED indicator integrated in the fire button. The remaining capacity is signalled in three stages by the coloured LED (green= 100%-40%; blue= 39%-10%; red= below 10%). The service is finally acknowledged with a red flashing light and the battery must be connected to the charger for a new exciting liaison.

Numerous protective functions integrated in the battery ensure safe operation at all times.

Conclusion: The Zlide Tube Kit is an excellent choice for demanding beginners and traditional MTL vapers who prefer the slim tube design and do not want to sacrifice endurance and comfort.

- elegant tube design
- LED indicator for battery charge level
- constant power output in 2 stages
- persistent set-up with 3000mAh and 4ml tank volume
- Top filling via sliding mechanism
- mechanical protection device prevents accidental opening of the tank
- clever coil connector system
- finely adjustable Airflowcontrol
- high quality of workmanship

Technical Data Zlide Tube mod:
- Dimensions: 90 x 24 mm
- Output Modes: constant wattage
- Power: 13 w and 16 watts (according to coil resistant)
- Resistance-range: 0.4 - 3.0 ohms
- Charging via Micro USB
- Pass-Through-Function (vaping while charging)
- Battery capacity: 3000 mAh
- Safety circuits: over-heating, deep discharge, short circuit, 15 sec cut-off, 3-click-activation

Technical Data Zlide tank:
- Material: stainless steel, glass
- Dimensions: 48 x 24 mm
- 4 ml fill capacity
- Kanthal Coil 0.8 ohm / 15 W - 18 W
- Kanthal Coil 1.2 ohm / 10 W - 14 W
- Kanthal Coil 1.6 ohm and Plexus Z Coil 0.5 Ohm optionally available
- Inhalation method: MTL (Mouth to Lung)
- Connector: 510

1 x Zlide Tube mod
1 x Zlide tank
1 x Kanthal Coil 1.2 ohm (pre-installed)
1 x Kanthal Coil 0.8 ohm
2 x drip tip (one of them pre-installed)
1 x replacement glass tube
1 x accessoires
1 x micro-USB charging cable
1 x manual
3 x e-liquid

GHS07: Exclamation mark
Harmful if swallowed. If medical advice is required, have packaging or label ready. Keep out of the reach of children. Wash hands thoroughly after use.

Shipping weight: 0,30 Kg


Average product review

Write your first review and help others with their purchase decision:

Recommended Hardware
Other customers have also bought the following items