Eleaf iJust 3 Ello Duro Kit + 3x free e-liquid

Eleaf iJust 3 Ello Duro Kit + 3x free Liquid

For the third generation of the iJust, Eleaf is digging even deeper in its bag of tricks and presents the premium class penstyle kit, which will also captivate demanding vapers.

The Ello Duro contained in the iJust 3 Kit is characterized by real star qualities, without any airs and graces. Equipped with the new HW Mesh coils, it becomes an icon of good taste, with which even fanatical RTA enthusiasts get into raptures. The Tank also provides dense, compact steam with a battery-gentle output of less than 80 watts keeping the steam pleasantly cool due to the mesh coils. The coil draws the air, so important for the taste, from three large airflow slots at base. If these are fully opened, you get an open draw experience in a class of its own.
The Ello Duro's liquid reservoir holds 6.5 millilitres and is filled cleanly and quickly via the slide-and-fill mechanism. Highly leak-proof, it then keeps the liquid exactly where it belongs: in the tank.

The star of the show is supported by the powerful iJust 3 battery. With its maximum output of 80 watts and its firing speed within 25 milliseconds, it is perfectly matched to the Ello Duro. Also optically they melt together to a unit, like from a single mold. With an overall length of 13.6 cm, the kit is pleasantly compact and fits well in the palm, while the structured surface provides a comfortable grip.

The mod has a built-in high-drain battery with a capacity of 3000 mAh, which gives you plenty of endurance. There are no adjustment possibilities, but the handling is all the easier: The mod operates with the established 1-button control via the power button. A coloured LED below the button indicates the battery charge level in 4 steps. If the battery is empty, it is charged using the USB cable supplied.

Features:
- very intense taste
- dense, compact steam
- durable mesh coils
- pleasantly cool steam
- large selection of HW coil heads
- Slide-and-Fill filling mechanism
- 6.5 millilitre tank capacity
- leak-proof
- bubble tank
- powerful battery
- instantaneous firing in 0.025 seconds
- compact pocket size
- 136 millimetres total length
- battery charge indicator
- 3000 mAh Capacity

Technical Data iJust 3 mod:
- Dimensions: 56 x 25 mm
- Output mode: bypass
- Battery: 3000 mAh (Inuilt)
- max. Output: 80 watts
- Resistance range: 0.1 - 3.0 ohms
- Charging: micro USB
- Connection: 510, spring-loaded
- Pass-Through (vaping while charging)
- Safety circuits: over-current, deep discharge, over-heating, short circuit, 10 sec cut-off, 5-click activation

Technical Data Ello Duro tank:
- Material tank: borosilicat glass
- Dimensions: 54 x 25 mm (Base)
- Diameter bubble-tank: 28 mm
- 6.5 ml fill capacity
- Resistance HW-M coil: 0.15 ohm / 50 W - 100 W (Best 70 W - 80 W)
- Resistance HW-N coil: 0.2 ohm / 40 W - 90 W (Best 65 W - 75 W)
- Inhalation method: DL (direct lung)
- Bottom-Airflow-Control
- Connector: 510

Including:
1x iJust 3 mod
1x Ello Duro tank
1x HW-M coil (pre-installed)
1x HW-N Coil
1x replacement glass 4 ml (straight)
1x spare parts
1x USB cable
2x manual
3x free Liquid